Please do not move, if there are other websites, if necessary, I will send it myself

请勿搬运如果有其他网站如需要我会自己发

Introduction: planned a Chinese Oriental dragon Lora, feel most of the entity is the most western dragon, so tried, have the prototype, but feel or 3D feeling and now can only be a dumpling, if you can run out of the good figure after iteration perfect the Lora, I only ran his big model you can try to play with other big model.

简介：原计划一个中国东方龙的Lora，感觉大部分实体的龙跑出的都是偏西方龙的大多数，所以尝试了一下，有了雏形，但是感觉还是3D感的而且现在只能算是一条蛟，如果之后能跑出不错的图多了就迭代完善此Lora，我只跑了自己的大模型大家可以尝试玩玩其他大模型。

If you can run a good picture, please be sure to return the picture to me, so that the full version of the Chinese dragon Lora, thank you

[SDXL White edge Lora], the pictures are for reference only

如果大家能跑出好的图，请一定要返图给我，这样早点进化为中国龙Lora的完整版，谢谢

[SDXL白棱Lora]，图片仅供参考

v1.0

This model is a role dragon model based on sd xl1.0

Recommended weight: about 0.9

Recommended size: such as 1024 1024,896 1280,768 * 1360, etc

Recommended steps: 20-50

Recommended word: bailing_eastern dragon

Reverse words: (wings: 2)

Note: Lora weight [-1.5] can make the dragon into a stone statue effect can also play with

• v1.0

• 本模型是一个基于sd xl1.0的角色龙模型

• 推荐权重：0.9左右

• 推荐尺寸：如1024*1024，896*1280，768*1360等

• 推荐步数：20-50

• 推荐词： bailing_eastern dragon

• 反词：(wings:2)

• 注意：Lora权重【-1.5】可以让龙变成石像效果也可以玩玩